Q-Pack

Q-Pack

Q-Pack

Q-Pack

Products Introduction of Q-Pack

Plastic Q-pack suitable for use in a lot of different potable water treatment processes, such as:

Biological treatment

Physical filtration

Pre-treatment for desalination

Drinking water treatment

Q-pack's large pore volumes and surface areas make it an ideal media for biological treatment of drinking water. Bio film processes are excellent for treating raw water containing ammonia, manganese, iron etc. In conventional filtration processes Q-pack can be used in different ways. In dual media filters Q-pack can be used in combination with sand. Tests have shown that Q-pack operates as well as or better than traditional filter media in these types of filters. Q-pack can not only be used in traditional drinking water treatment, but also in treatment of saline water. In desalination plants one of the most important parts is the pre-treatment process. Q-pack is an excellent filter media for use in pre-treatment filters in desalination plants.

Technical Specification of Q-Pack

Product name

Plastic Intalox Saddle

Material

PP, PE, PVC, CPVC, PVDF, etc

Life span

>3 years

Size mm

Drip several

Void volume %

Packing number pieces/m3

Packing density Kg/m3

Dry packing factorm-1

82.5*95

388

96.3

1165

33.7

23

Feature

High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.

Advantage

1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability.
2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.

Application

These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 150°.

Physical & Chemical Properties of Q-Pack

Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). The temperature in media ranges from 60 Degree C to 280 Degree C.

Performace/Material

PE

PP

RPP

PVC

CPVC

PVDF

Density(g/cm3)(after injection molding)

0.98

0.96

1.2

1.7

1.8

1.8

Operation temp.(℃)

90

>100

>120

>60

>90

>150

Chemical corrosion resistance

GOOD

GOOD

GOOD

GOOD

GOOD

GOOD

Compression strength(Mpa)

>6.0

>6.0

>6.0

>6.0

>6.0

>6.0

Material

Our Factory assure all tower packing made from 100% Virgin Material.

Material

Shipment for Products

1. OCEAN SHIPPING for large volume.

2. AIR or EXPRESS TRANSPORT for sample request.

Packaging & Shipping

Package type

Container load capacity

20 GP

40 GP

40 HQ

Ton bag

20-24 m3

40 m3

48 m3

Plastic bag

25 m3

54 m3

65 m3

Paper box

20 m3

40 m3

40 m3

Delivery time

Within 7 working days

10 working days

12 working days

Export Package

Qualification

Welcome to send your message to us
* Email
! !
* Content
!
Product Name
Your Name
Company
Tel/Fax.
Msn/Skype
Products
Jiangxi Kelley Chemical Packing Co., Ltd.
Tel: +86-799-6762199
Fax: +86-799-6782878
: Suzi Peng
: amory.yao.
Mob: +86-151 7997 9816 (WhatsApp, 24hours on line)
E-mail: export@jxkelley.com